User Manual

Medio S004 EVM
- The first one is the direct driver, which provides direct access to USB device via a dynamic
link library (DLL).
- The second one is the virtual COM port (VCP) driver. The VCP driver emulates a standard
PC COM port.
4.2.1 Window 98
®
USB Drivers Installation
Power up and connect your Medio S004 to a spare USB port on your PC. This should bring up a
“Building Driver Information Database” followed by the Windows Add New Hardware Wizard.
Click “Next” to proceed with the installation
 Select “Search for the best driver for your device” and then click “Next”
 Select “Specify a location” and click the Browse button to select the USB Drivers folder on
the Product CR-Rom. Once the files have been located, click “Next” to proceed with the
installation
 Click “Next” to install the device
 Windows® should then display a message indicating that the installation was successful.
Click “Finish” to complete the installation.
To confirm that the installation has completed successfully, open the Device Manager and select
“View devices by type”. The TAGSYS Medio S004 appears as a USB device connected to a USB
port
The next step is to install the VCP drivers.
Power up and connect your Medio S004 to a spare USB port on your PC. This should bring up a
“Building Driver Information Database” followed by the Windows Add New Hardware Wizard.
 Select “Search for the best driver for your device” and then click “Next”
 Select “Specify a location” and click the Browse button to select the USB Drivers folder on
the Product CR-Rom. Once the files have been located, click “Next” to proceed with the
installation
 Click “Next” to install the device
 Windows® should then display a message that the installation of the serial converter driver
was successful. The COM port emulation driver must now be installed. Click “Finish” to
complete the installation.
To confirm that the installation has completed successfully, open the Device Manager and select
“View > devices by type”. The TAGSYS Medio S004 appears as an additional COM port.
4.2.2 Windows XP USB Drivers Installation
Power up and connect your Medio S004 to a spare USB port on your PC. This will launch the
Windows Found New hardware Wizard
 Select “No, not this time” and click next to proceed with the installation
 Select “Install from a list or specific location (Advanced)” and then click “Next”
 Select “Search for the best driver in these locations” and click the Browse button to select
the TAGSYS USB Drivers folder on the Product CR-Rom. Then click “Next” to proceed.
 Windows should then display a message indicating that the installation was successful.
Click Finish to complete the installation
To confirm that the installation has completed successfully, open the Device Manager and select
“View > Devices by type”. The TAGSYS Medio S004 appears as a USB device connected to a
USB port.
October 2006 Revision 1.1 17/33