User Manual

Medio S004 EVM
4 Getting Started with the EVM
4.1 Installing the EVM product
1. Before any plugging takes place, please select the communication mode using the serial
selector.
Asynchronous serial mode
Synchronous serial mode
2. Plug both power supply and USB supply cables to the EVM.
If the Synchronous serial communication is selected, the green LED for Serial Communication
mode turns on.
DO NOT change the Serial Communication Selector until both power supply and USB cable
are unplugged or unpredictable result can occur.
4.2 Installing EVM drivers
At first connection to the PC USB port, Windows® will detect the TAGSYS Evaluation Board (for
Medio S004 reader) and will ask you for driver installation. USB drivers are located into the USB
Drivers folder on the product CD-Rom.
Two drivers must be installed:
16/33 Revision 1.1 October 2006