User's Manual

Library L100 Reader User's Guide
8.3 Scanning (Reading) 27
8.4 3-D Rotating Field Applications 28
8.5 Pattern Examples 28
8.5.1 Enabling one Antenna after Another 28
8.5.2 Enabling both Antennas Simultaneously 29
8.5.3 Enabling each Antenna separately and then both at once 29
9 I/O Ports 30
9.1 General Purpose I/Os 30
9.2 Internal Connections 30
9.2.1 Input Configuration 30
9.2.2 Output Configuration 31
9.2.3 VOUT Characteristics 31
9.3 Input Configurations 31
9.4 Output Configurations 32
10 Calibration 34
11 Debugging 35
11.1 Debugging Tools 35
12 Technical Specifications 36
12.1 Technical Specifications 36
12.2 36
12.3 Serial Port Pin Assignment 37
13 Electrical Characteristics 38
13.1 Absolute Maximum Ratings 38
13.2 Standards Compliance 38
13.3 Power Supply DC Characteristics 39
13.4 Communication Link DC Characteristics and Timing 40
13.5 Antenna Electrical and Timing Characteristics 41
13.6 I/O Electrical and Timing Characteristics 42
14 Warranty Conditions 43
14.1 Warranty 43
14.2 Warranty Exclusions 43
14.2.1 General Provisions 44
14.2.2 How to Return Defective Products 44
8/45 Revision 3.1b April 2003