User Manual

Configuration
Motion Detector
• Status: Display if a motion detector is present
• Alarm: 2 possibilities
1. Set alarm to raise even if no motion is detected
2. Set alarm to raise only if motion is detected.
5.4 Alarm Buzzer Volume Adjustment
The alarm buzzer is located at the top of the pedestal.
To access to the buzzer potentiometer unscrew the two screws on each side and remove the
top cover as shown in the following figures.
Figure 17: Front View
Top Cover
Figure 18: Side View
Side screw
Figure 19: Alarm Potentiometer
Potentiometer
Turn it clock wise to
decrease volume
December 2004 Revision 1.0 31/50