User Manual

LIBRARY SECURITY PEDESTAL 2
Memory Reading
When selected, the L-SP2 will try to read memory of items (with EAS activated) passing through
the gate.
Synchro
Select whether the pedestal is to be configured as the Master or as the Slave (1, 2, …7)
Only one Master can be selected with several slaves.
Select ID (same ID for Master and slaves for one system installation)
This parameter is the identifier of the Master and when a pedestal is configured as a Slave it is the
Master’s ID that the slave will answer to. For a Master/Slave system it is mandatory that all the
pedestals use the same ID.
In this library configuration sample below we have:
- system A with ID = 1 (M1 Master, S1,2,3 Slaves)
- system B with ID = 2 (M2 Master, S4,5 Slaves)
The Masters are disposed as far as possible from each other not to perturb themselves. ( Please
refer to
section 4.2.2, ‘Placement of Pedestals ‘.
Two different IDs to be sure that there will be no interferences and no faulty alarms due to the
nearby proximity of the two systems.
Figure 12: Multigate Configuration with 2 different IDs
System B
With
ID = 2
Nearby proximity
area with no
interferences
M1 S1 S2 S3
M2
S4
System A
With
ID = 1
Alarm
Select alarm time (using a time step of 0.5 s. From 0.5 to 5 s)
26/50 Revision 1.0 December 2004