User Manual
Table Of Contents
LIBRARY SECURITY PEDESTAL 2
5.2 Using the Configuration Software
Don’t forget to power up your installation before carrying on the following steps
Connect your PC RS232 COM port to the L-SP2 as shown below.
Figure 9: PC Connection to Pedestal
RS232 cable
connected to the
PC COM port
5.2.1 Installing the Configuration Software
The L-SP2 Configuration Utility is on the CD-Rom provided with the L-SP2.
Launching the Installer from the CD-Rom will display the following window:
22/50 Revision 1.0 December 2004