User Manual

Certification
2 Certification
2.1 Occupational Health
TAGSYS L-SP2 EAS System has been designed and tested to be in conformity with the European
Standard EN 50364 “Limitation of human exposure to electromagnetic fields from devices used in
Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar
applications” in conjunction with the European Standard EN 50357 describing how to evaluate the
exposure level.
2.1.1 Public Exposure
The EAS systems are only planned for transitory use by the public.
Que les bibliothécaires mettent en place les mesures de surveillances aux portes pour exclure
la permanence d’une personne entre elles.
2.1.2 Employees Exposure
The operators are located apart from the principal detection zone. So ils ne court aucun risque,
Les travaux les plus avncés de l’EN + travaux en cours + description de la norme + remarques
données par le labo.
(Please see
section 4.2.2, “Placement of Pedestals”)
Regarding European Standard EN 50364 and because the EAS system expose in a transitory
way people who cross it, it is recommended not to wait in the middle of the system.
For servicing operations it is recommended to deactivate the EAS system.
2.2 Safety Notices
The L-SP2 is also tested to be in conformity with the EN standard 60950-1: “ Information
Technology Equipment Safety”
It is the responsibility of the CIT (Certified Integrators by TAGSYS) to install the L-SP2 as
described in TAGSYS Product Manuals or TAGSYS Documentation and with the appropriate
antennas.
Modification of any TAGSYS Library System is prohibited without the written consent of TAGSYS.
Unauthorized modifications may void the conformity of the equipment to safety specifications and
will void the TAGSYS warranty.
December 2004 Revision 1.0 11/50