User's Guide

How to Improve Performance
Figure 16: Entering Firmware Key
8. If the new firmware has been successfully downloaded, a message is displayed. If the final
dialog box at the end of the procedure contains an error message, reload the original
firmware supplied with the L-HR1 Reader and contact your approved TAGSYS
representative.
9. Click OK to reset the L-HR1 Reader.
Always use Firmware upgrades supplied by TAGSYS. If you have any doubt on the origin of
the firmware you intend to download; contact your TAGSYS approved reseller. Any attempt to
download a Firmware supplied by a third party may lead to permanent damages to the L-HR1
Reader.
Never interrupt the Firmware upgrade procedure while the firmware is being downloaded. This
may lead to permanent damages to the L-HR1 Reader.
July 2003 Revision 1.2 25/34