User's Guide

L-HR1 Library Handheld Inventory Reader User's Guide
4.2 How to Install the Application Software on the PDA
The application software is supplied on the CD-ROM included in the L-HR1 Library Handheld
Inventory Reader Delivery Kit.
1. Connect the PDA to your PC.
2. On your PC, open the Microsoft ActiveSync application.
3. Open the application ZIP file on the TAGSYS CD-ROM.
4. Copy the files of the ZIP file to a directory on the PDA.
4.3 Connecting the L-HR1 Reader to the PDA
To connect the L-HR1 Reader to the PDA, perform the following steps:
1. Make sure that the PDA is turned on and is recharged.
2. Make sure that the L-HR1 Reader is turned off.
3. Connect the connection cable to the PDA.
4. Connect the other end of the connection cable to the L-HR1 Reader (Figure 6).
5. Switch on the L-HR1 Reader.
6. Run the software demo application on the PDA.
Figure 6: L-HR1 Reader Connections
PC/iPAQ
Connection
Battery Charge
r
Connection
18/34 Revision 1.2 July 2003