User's Guide

Overview
Figure 1: Handheld Inventory Reader Application
3.2 L-HR1 Reader
The L-HR1 Reader reads the smart labels that are used to identify books.
The On/Off switch located at the base of the L-HR1 is used to switch the reader on and off.
The Read switch is used start the Read process. The Read switch is a 3-position paddle switch.
Press the switch up (towards the Power LED) and the switch is locked in place. Press the switch
down, it can be used as a trigger.
The Power LED indicates the status of the internal NiMH batteries. When green, the batteries are
correctly charged. When orange, the battery power is low. When red, the batteries must be
recharged.
The Read LED switches on (red) when a smart label is detected (read).
Figure 2: Handheld Inventory Reader for Libraries
Antenna
Read LED
Power LED
Read Switch
On/Off Switch
Connections
Grip
July 2003 Revision 1.2 15/34