User Manual

Getting Started
5.4 How to Encode a Tag
o To write data into a tag, click Write, enter the identifier to write and click Write Tag
5.5 How to set Reader Parameters
o To adjust the power, use the horizontal cursor (+15dBm<Power< +28dBm = 630mW)
o Q Value is an anti-collision parameter which defines the number of time slots during the
reading process (number of time slot = 2
Q
).
Select the Q value and click Apply
(For further information please refer to the EPC Class 1 Gen 2 protocol specification)
o Select Reader Port according to the PC serial port you chose in
§ 3.1
July 2006 Revision 1.2 17/20