AK Tag Business Kit User's Guide Revision 1.
AK Tag Business Kit User's Guide Publishing Information Disclaimer and Limitation of Liability All information herein is either public information or is the property of and owned solely by TAGSYS who shall have and keep the sole right to file patent applications or any other kind of intellectual property protection in connection with such information.
Publishing Information Table of Contents PUBLISHING INFORMATION __________________________________________________________ 2 DISCLAIMER AND LIMITATION OF LIABILITY __________________________________________________ 2 1 FOR YOUR SAFETY _______________________________________________________________ 4 1.1 GENERAL USE ____________________________________________________________________ 4 1.2 CARE AND MAINTENANCE ___________________________________________________________ 4 1.
AK Tag Business Kit User's Guide 1 For Your Safety 1.1 General Use The SIRIT/TAGYS Reader is designed to be reliable and to provide years of trouble-free service. Please observe the following general tips: Take care not to scratch the device. Keep the device clean. When working with the device, use only TAGSYS-approved accessories. This device is not waterproof and should not be exposed to rain or moisture. Under extreme conditions, water may enter the circuitry.
For Your Safety 1.3 Important Safety Information 1.3.1 Operating Environment When connecting the device or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products. As with all RF equipment, users are advised that the equipment should only be used in its normal operating position. July 2006 Revision 1.
AK Tag Business Kit User's Guide 2 Certification 2.1 Occupational Health FCC Radiation Exposure Statement: This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment under the following conditions; 1. This equipment should be installed and operated such that; a minimum separation distance of 20cm is maintained between the radiator (antenna) & user’s/nearby people’s body at all times. 2.
Certification 2.2.1 In USA (FCC Directive) SIRIT/TAGSYS Reader WARNING TO USERS IN THE UNITED STATES FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO INTERFERENCE STATEMENT 47 CFR Section 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
AK Tag Business Kit User's Guide 3 Overview 3.1 Introduction Welcome to the TAGSYS RFID Adaptive Kernel (AK) family of tags. The AK Tag Business Kit is a low-cost evaluation kit designed for people and companies that wish to know more about TAGSYS’ The Package Is The Tag™, an integrated packaging approach featuring world’s first adaptive EPC Gen 2 family of tags for item-level RFID, the AK Tag.
Overview 3.4 AK Tag Business Kit Figure 2: AK Tag Business Kit July 2006 Revision 1.
AK Tag Business Kit User's Guide The items listed in Table 1 are included in the AK Tag Business Kit.
Overview Figure 3: A standard courier envelope Figure 4: A standard luggage label July 2006 Revision 1.
AK Tag Business Kit User's Guide Figure 5: A fashion price tag Figure 6: A box 12/20 Revision 1.
Technology and Performances 4 Technology and Performances 4.
AK Tag Business Kit User's Guide Figure 7: AK Tag Module Booster 14/20 Revision 1.
Getting Started 5 Getting Started 5.1 How to Install the SIRIT/TAGSYS Reader 1. Plug the power pack to the SIRIT/TAGSYS reader. 2. Connect the serial connector to the PC serial port. Now the installation is complete and ready for read/write operations. Figure 8: Hardware connections Figure 9: SIRIT/TAGSYS reader July 2006 Revision 1.
AK Tag Business Kit User's Guide 5.2 How to Install the Demonstration Software o Launch the AK Tag Explorer software from the CD-ROM. (SetUpAKExplorer.msi file) The AK Tag Explorer software requires the Microsoft .net frameworks V2.0 to run (it can be downloaded from the Microsoft website) 5.3 How to Read a Tag o Place the AK Tag above the antenna o To read data of an AK Tag, click Start 16/20 Revision 1.
Getting Started 5.4 How to Encode a Tag o To write data into a tag, click Write, enter the identifier to write and click Write Tag 5.5 How to set Reader Parameters o To adjust the power, use the horizontal cursor (+15dBm
AK Tag Business Kit User's Guide 5.6 How to Get SIRIT/TAGSYS Reader Information o 18/20 To get information about the SIRIT/TAGSYS reader, click Version Revision 1.
Getting Started 5.7 If you need assistance Please contact your nearest TAGSYS sales representative: Country July 2006 TEL E-mail USA +1 267 895 1750 Toll Free +1 877 550-RFID ASIA PACIFIC +852 2526 7984 son.lai@tagsysrfid.com EUROPE +33 (0) 4 91 27 57 07 emmanuelle.vella@tagsysrfid.com Revision 1.2 dottie.otoole@tagsysrfid.
AK Tag Business Kit User's Guide www.tagsysrfid.com 20/20 Revision 1.
