Instruction Manual

9
Speaker Mounting
The below mounting procedure applies to drywall walls, drywall ceilings and dropped ceilings
or similar.
You will have to cut a hole in a wall or ceiling. With the right tools and a little extra care
and preparation, installing the speaker can be both quick and easy.
There are 2 types of paper templates which are helpful to cut out a hole for installing the speaker.
Your speaker is supplied with one of the templates.
Type #1 a template, in which a hole along the drawn line should be cut out.
• Carefully cut out the hole drawn on the template.
• Position the template in the place you wish to mount the speaker, and draw a line
on the wall / ceiling along the inside edges of the hole.
Type #2 a template in the shape of a hole which has to be cut out in the wall / ceiling.
• Position the template in place you wish to mount the speaker, and draw a line
on the wall / ceiling along the outside edge of the template.
Make your cuts along the line in the wall / ceiling. Try to keep the cuts neat, however the frame
of the speaker will overlap the hole to hide any rough edges.
Place the speaker cable in the hole.
Connect the speaker cable to the speaker terminals.
Models equipped with the screw type clamps
CLAMPS
CLOSED
CLAMPS
OPENED
CLAMPS
CLOSED
CLAMPS
OPENED