Instruction Manual

10
Speaker Mounting
Additional Features
Selected model are equipped with some of the following features:
• Magnetically mounted grille - easy to put on and take off. Make sure not to place
any objects between the grille and the speaker frame with mounted magnets.
• Swivel tweeter - depending on your particular primary listening area, room
acoustics, ceiling height, or personal preference, you may nd the sound more
pleasing by pointing the tweeter in a particular direction. If additional treble is
desired in the primary listening area, point the tweeter towards that area; and if less
treble is required, point tweeter away.
Push gently at the edge of the tweeter to point it in the desired direction.
• +/- xdB Environmental Equalizer (treble or bass switch) to compensate speaker
positioning and room anomalies.
Switch positions:
+ xdB (+ or top position depending on a model): the tweeter or woofer will play xdB
higher.
0/Flat (center position): tweeter or woofer will play in the most linear frequency
response.
- xdB (- or bottom position depending on a model): the tweeter or woofer will play
xdB lower.
Note! x - a number of dB.
• Remove the speaker grille by pressing the mounting screws from the back of the speaker.
• With grille removed, insert the speaker into the mounting hole.
• Use a screwdriver to turn the mounting screws slowly clockwise.
• The cut edges of the wall or ceiling will be sandwiched rmly between the mounting clamps
and the speaker frame.