Phau Ntawv Qhia
8/27/22, 3:46 PM
2018 F-150
https://www.fordtechservice.dealerconnection.com
3/5
5. NOTE: Make sure that protective caps are removed prior to installation.
1. NOTICE: The blanking caps/plugs must not be removed until the brake tubes are ready to be
connected.
Remove the bolt and disconnect the brake hose. Discard the washers.
Torque: 26 lb.ft (35 Nm)
2. Remove the parking brake actuator motor.
RH or LH parking brake actuator motor
6. NOTE: RH side shown, LH similar.
Remove and discard the O-ring.