User Manual

14
EN
Congratulation on your purchase of the Yakovlev Yak-11 from Staufenbiel . This represents a faithful
reproduction of the two-seater Soviet training aircraft in foamed design. The model can be completed
in just a few work steps thanks to its high level of prefabrication.
Besides the motor (5052-410KV), the scope of supply includes an 80A-BEC controller made by
Hobbywing as well as 6 servos plus electric retractable landing gear - please do not on any account
attempt to extend this by hand using force; this is only possible via the remote control!
PREFACE
The construction of the model and the detailed solutions related subject to a certain taste dependency.
Therefore, the solutions to these instructions are to be understood as a suggestion. There are certainly other
options and approaches. In some alternatives is therefore received during the building specications, but
does not shown on the pictures.
THE WINGS
To begin with, bring all parts of the wing neatly
together so that nothing can or lost or mixed
up.
1
Introduce the wing connector into both wings
and slide together. CAUTION: A great deal of
force might be needed for this. Make sure that
the wing is not damaged by this. We recom-
mend you enlist the help of a second person to
hold the opposite wing root.
2
Mount the two wing retainers. These are desi-
gned differently. The cornered retainer must be
tted at the front, while the rounded retainer
must be tted at the rear.
3