User Manual

Programming mode: To boot into programming mode the tournament lock must be off. The user can then hold
down the trigger while pressing the power switch to boot into programming mode. After the menu boot message,
the displayed setting will be the last one that was modified. If this is the first time the board has been booted into the
menu system, it will show the fire mode.
Scroll forward or backward through the settings by pressing and releasing the top or bottom buttons. The menu will
wrap around to the beginning when the last setting is reached.
To change a setting the user must quickly press and release the middle switch. The OLED screen will reflect this by
displaying “set” in front of the current value. The setting can be modified at this point by pressing either the top or
bottom buttons to increment or decrement the current value. After the desired value is displayed, you can save the
setting by pressing the power switch. The “set” designation next to the value will disappear.
Example to change the maximum rate of fire from 15 to 20:
1. Boot into programming mode by holding the trigger while pressing the power switch.
2. The first setting is fire mode:
3. Press the bottom button 1 time to advance to the next setting, which is the maximum rate of fire:
4. Press and release the power button quickly. The OLED screen will display the “set” designation next to the
current value for maximum rate of fire:
5. Press the top button 5 times to increment the value from 15 to 20:
6. Press and release the power button quickly. The OLED screen will remove the “set” designation from view
and save the setting:
7. Cycle through additional settings using the top and bottom buttons, or exit programming mode by holding
the power switch for 1second, until the OLED screen turns off.
SETTINGS
Fire mode (default semi-automatic unlimited)
1. Semi-automatic unlimited
2. Semi-automatic adjustable
3. PSP ramping – 123 shots semi, on 4
th
shot ramps at 5 pulls per second, resets after 1 second
4. PSP burst – 123 shots semi, on 4
th
shot fires 3-round burst, resets after 1 second
5. NXL full-automatic – 123 shots semi, on 4
th
shot fires full-automatic, resets after 1 second
6. Millennium ramping – 123 shots semi, on 4
th
shot ramps at 6 pulls per second, ignores ramp start
setting if less than 6 pulls per second, resets after 1 second
7. Custom ramping – user adjustable ramping, select custom ramp start and ramp percentage
8. Auto response – fires on each pull and release
9. Burst – 3-round burst
10. Full-automatic – 1 shot semi, on 2
nd
shot fires full-automatic, resets after 1 second
Maximum rate of fire (default 13 bps, range 10-30 and infinity)
The semi-automatic unlimited fire mode ignores this value, making it easy to switch back and forth between NPPL
and PSP gun rules without modifying more than one setting. Adjustable from 10 to 30, with an unlimited option
designated by the infinity symbol.
Fine rate of fire timing (default 0.0, range -2.5 to +2.5)
Allows fine adjustment of the maximum rate of fire in 0.5 millisecond increments, from -2.5 to +2.5 milliseconds.