User Manual

PSP/Millennium mode reset time (default 900 ms, range 200-2000 ms):
Adjusts the reset time for any of the PSP or Millennium fire modes for when the user stops shooting before it reverts
back to the initial semi-automatic shots, as selected in the previous setting.
G mode or “breakout mode” (default off)
This breakout setting provides unlimited full-auto, which then falls back to the user selected fire mode, on the 1
st
,
2
nd
, or 3
rd
shot after turning the board on. Breakout modes are illegal for use in all tournament series and most
recreational paintball fields. Tadao Technologies LLC takes no responsibility for the user’s choice in using
breakout modes.
Rate of fire display mode (default average)
1. Maximum – displays the highest achieved rate of fire based on the shortest time between any 2 shots.
2. Average – displays the highest achieved average rate of fire based on 3 consecutive shots.
3. Off – compact display mode that reduces power consumption and does not show a rate of fire value.
Brightness (default 5, range 1-5)
Allows adjustment of the OLED display brightness. Lower settings are less bright, with a setting of 1 useful for
night play and scenario games.
Screen orientation (default vertical): The screen can be oriented in three ways: landscape left or right, or vertical.
Boot screen timer (default 1.5 seconds, range 0.0 to 3.0 seconds):
Adjusts how long the boot screen is displayed when the board is turned on.
Auto-dim timer (default off, range 1 to 15 seconds):
Automatically dims the OLED brightness to the minimum value after the specified time to help conserve battery
life. The brightness will return to the user specified setting if the marker is fired or any input is provided via the
various switches.
Screensaver timer (default off, range 1 to 15 seconds):
Displays the boot screen image after the specified amount of time passes. The main operating display will return if
the marker is fired or any input is provided via the various switches.
Auto-off timer (default 30 minutes, range 5 to 60 minutes, or disabled):
Adjusts how long the board must sit idle before automatically powering down to conserve batteries.
Shot counter:
Displays the number of shots. Can be reset by pressing/releasing the power switch.
Save/Load profile:
Allows the user to save or load settings in 5 separate profiles. Both saving and loading profiles follow the same
operation. Enter the setting by pressing the power switch, then use the trigger to scroll to whichever profile you
want to save or load. Press the power switch once the desired profile is selected. The board will prompt you for
confirmation of the save or load, and then proceed to complete the action, or if aborted, return back to the main
setting menu.
Reset
Allows the user to perform a settings reset, which returns all settings to their default values. Saved profiles and the
boot screen image will not be reset.
Version
Displays the current software version running on the Yakuza series board.
Autococker Timing/Rate of Fire Information
Total cycle time for the autococker is:
Eyes off: dwell + bolt open delay + bolt open time + bolt close delay
Eyes on: dwell + bolt open delay + bolt open time + ball in place delay + bolt close delay
(The watch time setting will be placed after the bolt open time if no paintball loads immediately)