User Manual

The FET can directly switch a current of up to 300 mA without using the internal relay. Figure 8
shows the connections:
The ‘Inhibit’ line can be used to inhibit any switched output without resetting the ‘Maxi-MINDA’. If,
for instance, a large remote bell were connected to ring whenever a ‘Red’ alarm was received,
the Inhibit line could be used to cancel the alarm locally without having to return to the ‘Maxi-
MINDA’ receiver and press the ‘Reset’ button. All that is required is for the ‘Inhibit’ line to be
temporarily grounded until the alarm has been cancelled at the receiver. Figure 9 shows the
additional
connections needed to implement the ‘Inhibit’ function: