User Manual

ECHO5 – User Guide, 1.0.3 Introduction

Operating Frequencies

The frequencies available on the ECHO5 are spaced in 12.5 kHz steps.

Simply put, “12.5 kHz steps” means your frequency must be in any of

the following configurations:

xxx . x000

xxx . x125

xxx . x250

xxx . x375

xxx . x500

xxx . x625

xxx . x750

xxx . x875

This gives the ECHO5

the ability to transmit on any one of 40

available frequencies. To change frequencies press the freq. button

on the front panel of the ECHO5, the receive and transmit frequencies

are displayed on the LCD. The cursor will blink on the RX frequency,

by pressing the up or downs buttons on the front panel the frequency will

scroll in 12.5 kHz steps. Press the freq button again and the cursor will blink

on the TX frequency, scroll the frequency by using the up and down buttons.

The frequencies can be stored in 16 memory locations.