Operator's Manual

TRANSMITTER OPERATION
1.) CST-2001 comes with a single external, integral
microphone/antenna component. Install microphone/
antenna to its appropirate connector on top of
transmitter. The four pin connector is keyed for
proper installation. Be sure to lock down the
connector by twisting the screw ring clockwise until
it snugs up to the panel connector. DO NOT
OVERTIGHTEN.
2.) Select frequency to operate on by positioning
frequency select slide switch:
Single white O is frequency 1
Double white OO is frequency 2.
3.) Turn on/off switch to ON position
Red O is OFF
Green O is ON
4.) Test Operation using appropriate receiver.
F1 F2 OFF ON