User's Manual

Figure 1 Programming adaptor
RUNNING THE SOFTWARE
Please note that mouse operation is not supported with this program
1.
Connect TX00 to a suitable supply and to the PC using the programming adaptor.
2.
Insert the TPRG disk into drive A and type:
A:TPRG <return>
3. The user is then prompted to enter the serial port number of his PC which is used to
communicate with the TX00 transmitter. Enter 1 or 2.
After the software has successfully loaded the screen displays the following prompts:
Enter frequency in MHz?
The user can then enter the required operating frequency and then ‘0' to quit.