User Manual

26
1AI1FL: Highlight the FLAP  ELEV mix percent and adjust as desired. Press ENTER
when  nished. Assigning a switch can allow on/off control of the mix. Set a mix percentage
for each position of the switch (SP.0, SP.1, SP.2).
2AI1FL: If this wing type was set, the  ap channel can be mixed with the aileron, elevator,
or back to the  ap. Set the mix percent for each channel to be mixed, for all switch
positions that control the mix. Do NOT assign a switch at the CTRL line to make the
mix active at all times. Press ENTER when done.
AIR BRAKE SET
This function will allow you to de ne
the air brake position and activate it
with a switch.
When the 1AI1FL wing type is
selected the brake can be mixed to
elevator and/or  aps. Adjust each
mix percentage as needed. Select
a switch to turn the mix on/off.
Normal Switch Control
FLAP->ELEV MIXING
CTRL :-----
FLAP->ELEV MIXING
Elev Flap
NORM : 0% 0%
Elev Flap
SP .0: 0% 0%
SP .1: 0% 0%
SP .2 : 0% 0%
CTRL :SC(2)
Flap to aileron mixing,
no control switch set
Flap to elevator mixing,
set with 3 position switch
FLAP->AILE MIXING
Aile Elev Flap
NORM : 0% 0%+100%
CTRL :-----
FLAP-> ELEV MIXING
Aile Elev Flap
SP .0: 0% 0%+100%
SP .1: 0% 0%+100%
SP .2 : 0% 0%+100%
CTRL :SC(2)
1 Ail, 2 Ail,
1 Flap 2 Ail 1 Flap
Brake to Elev X X
Brake to Ail X
Brake to Flap X X
AIR BRAKE SET
ELEV: 0%
FLAP: 0%
CTRL :SE