User Manual

Normal: To make AILE DIFFERENTIAL active at all times do NOT assign a switch at

the CTRL line. Press ENTER to highlight the differential rate percent and press or

to  nd the desired value. Press ENTER when  nished.

Switch Control: To control the mix with a switch, move the cursor to the CTRL line

and press ENTER. De ect the switch that will control the mix. The screen will show the

functional assignments for each position of the switch as described previously. Press

ESC to con rm the switch selection. The display will now show the different switch

positions (SP.0, SP.1, SP.2). A different rate can be set for each switch position.

De ect the switch to one position, and note the cursor on-screen will move automatically

to the rate for that position. Adjust that rate as desired. De ect the switch to the remaining

positions and repeat. To remove a switch which might have been assigned previously,

highlight the switch selection in the CTRL line and press CLEAR.

Press ESC once all mixing values are set to return to the FUNCTION menu screen.

AILERON MIXER

Normal Ail > Rudd X X X X

Delta Ail > Rudd X X

1 Ail, 2 Ail,

Tail type Mixing 1 Ail 1 Flap 2 Ail 1 Flap

The aileron channel can be mixed to the rudder channel, which can be useful with

certain wing/airplane types.

To make this AILE  RUDD mix active at all times do NOT assign a switch at the CTRL

line. Adjust the mixture percentage and press ENTER.

On/off control of this mix can be assigned to a switch. Set the mix rates as desired for

each switch position. Press ESC when  nished.

AILE DIFFERENTIAL

Aile

NORM: 0%

CTRL :

_____

AILE DIFFERENTIAL

Aile

SP .0: 0%

SP .1: 0%

SP .2 : 0%

CTRL :SC(2)

Normal Switch Control

AILE->RUDD MIXING

Rudd