User Manual

13
TTX610 TRANSMITTER
Channels: 6
Frequencies: 2.403 – 2.480GHz
Modulation: FHSS spread spectrum
Input power: four “AA” alkaline, NiCd, or NiMH cells (not included)
Output power: < 0.1W
Power indicators: LED, with low voltage alarm
Reversing switches: DIP switches, all channels
Trims: digital for each channel
Antenna: built-in non-removable
Charge jack: built-in (Futaba compatible, for use with optional NiCd or NiMH cells)
Trainer function: wired, and wireless (compatible with Tactic brand transmitters only)
Trainer jack: 3.5mm mono headphone socket
Optional mixes: elevon, V-tail
TR625 RECEIVER
Channels: 6
Frequencies: 2.403 – 2.480GHz
Modulation: FHSS spread spectrum
Input power: four “AA” NiCd or NiMH cells (4.0-6.0V, not included)
Failsafe: throttle adjustable, all other channels maintain last recognized positions
Dimensions: 1.77 x 0.98 x 0.5” (45 x 25 x 13mm)
Weight: 0.28 oz. (8g)
OTHER ITEMS INCLUDED
● On/off switch harness with built-in charge lead ● Neck strap
● 4 cell “AA” battery holder for receiver
● NEVER allow water or moisture to make contact with the electronic components inside the
transmitter, receiver, servos, switch harness, etc.! This could lead to failure or improper
functionality of components and poor control of aircraft which could pose a safety hazard.
● NEVER operate R/C model aircraft near power lines, radio or cell phone towers, roads or automobiles,
buildings, or pedestrians. Be very careful in locations where many R/C aircraft are being used simultaneously.
● NEVER operate R/C equipment if you are physically impaired as it could pose a safety hazard to yourself
or others in the area.
● NEVER allow small children to operate/control model R/C equipment without the supervision of an adult.
● NEVER allow the transmitter’s throttle stick to accidentally be moved away from the “off” or minimum
position while the model’s engine/motor is moving.
● ALWAYS range check the radio system before use.
● ALWAYS make sure that all transmitter stick movements operate all servos properly in the model. Check
the proper operation of control surfaces before and after starting the engine/motor.
● Do not store your radio equipment in extremely hot or cold locations, in direct sunlight, in locations with
high humidity. Store R/C equipment in cool and dry locations.
SPECIFICATIONS
IMPORTANT WARNINGS and PRECAUTIONS