Manual

P36document version 1.0 | © 2022 tacterion GmbH | all rights reserved
ATTENTION: Connect the readout electronics to one power supply only,
either USB or through the pin header input. Connecting the readout
electronics to two power supplies may result in damages to the devices
and sensors, injury, or property damage.
HINT: VDD 3.3V input won‘t be sufficient to power the onboard LEDs
HINT: Maximum current supply capability of VDD out = 50mA, if exceeded
the D-01 shuts down
HINT: The data output is identical for USB-CDC and UART-out and is sent
simultaneously. For details please check chapter 4.2.2