Manual

6.3 LED Feedback

The D-01 carries 3 areas (1-3) to provide realtime visual feedback of the interaction

forces and one system status LED (4).

1. proximity feedback LED: 2 color status diode indicating the approximation of e.g.

a human hand once set up correctly. Only active with sensors connected to the

„PROXIMITY“ socket.

2. standard feedback LEDs: RGB LED array indicating different force levels through

gradient color. Only active with sensors connected to the „STANDARD“ sockets.

3. slider LEDs: white unicolor LED array indicating position and force intensity at the

given position (change in brightness). Only active with sensors connected to the

„SLIDER“ socket.

4. status LED: blinks green if board is powered.

status LED (4)

standard feedback LEDs (3)

slider feedback LEDs (2)

proximity feedback LED (1)