Brochure

Cast iron casing with integrally
cast feet enables pump to be
bolted to base for sturdier
installation. Allows for back
pull without disturbing piping.
Low-cost, replaceable wear rings
protect casing during normal
operation.
Standard ceramic seals promote
product flexibility, enabling basic
product offering to meet a
wide range of application
requirements.
Dry shaft design ensures shaft
is never exposed to system fluid,
eliminates need for expensive
corrosion-resistant shaft, and
simplifies sleeve and seal
removal/reassembly.
Rear pullout design allows pump
to be serviced without disturbing
system piping.
1/4 NPT pressure tapping on
suction and discharge
connections.
Easy-to-replace slip-on shaft
sleeve facilitates seal mainte-
nance in the field and lowers
long-term maintenance costs.
Flush seal line tap allows
installation of filter to protect
seal from particles present
in open systems.
Top centerline discharge design
simplifies piping layouts, reduc-
es piping strain, and makes the
pump self-venting.
FI Series Pumps
End Suction
Split Coupled
Base/Frame Mounted
GPM: 40 - 4,000
Head (ft): 10 - 380
HP: 1/3 - 200
SIZES: 1-1/4” — 10”
Flush seal line taps allow for
installation of filter to protect
seal from particles present in
open systems.
1/4 NPT pressure tapping on
suction and discharge
connections.
Standard ceramic seals
promote product flexibility,
enabling basic product offering
to meet a wide range of
application requirements.
Low-cost, replaceable wear rings
protect casing during normal
operation.
Top centerline discharge design
simplifies piping layouts, reduces
piping strain, and makes pump
self-venting.
Cast iron casing with integrally
cast feet enables pump to be
bolted to a housekeeping pad
for sturdier installation and still
allow back pullout without
disturbing the piping.
Dry shaft design ensures shaft
is never exposed to system fluid,
eliminates need for expensive
corrosion-resistant shaft, and
simplifies sleeve and seal
removal/ reassembly.
Easy-to-replace slip-on shaft
sleeve facilitates seal mainte-
nance in the field and lowers
long-term maintenance costs.
Rear pullout design allows
pump to be serviced without
disturbing system piping.
CI Series Pumps
End Suction
Close Coupled
Foot Mounted
GPM: 40 - 2,200
Head (ft): 10 - 380
HP: 1/3 - 50
SIZES: 1-1/4” — 8”
 5 