Submittal Sheet

101-191
006e3 ECM Circulator
Effective: February 27, 2018
Supersedes: NEW
Submittal Data Information
Job: Engineer:
Contractor:
Rep:
ITEM NO. MODEL NO.
A Taco Family Company
201
®
Specifications
• Maximum Shut-off Head: 13 feet
• Maximum Flow: 11 gpm
• Maximum Operating Pressure: 150 psi
(10 bar)
• Maximum Water Temp: 203°F (95°C)
• Minimum Water Temp: 36°F (2°C)
• Electrical Specifications:
Voltage: 120V, 60 Hz
Single phase
Max. Operating Power: 44W
Max. AMP Rating: 0.54
• Equipped with a composite casing
designed for open loop potable
water systems and closed hydronic
systems
• Not suitable for chilled water
• Taco circulator pumps are
for indoor use only
• Acceptable for use with water or
maximum of 50% water/glycol solution
in closed hydronic systems
Pump Dimensions & Weights
Electrical Data
Model Volts Hz Ph Max.Amps Watts RPM
All Models 120 60 1 .54 44 1440 - 3720
Motor
Type
ECM, Permanent Magnet, Thermally Protected
Materials of Construction
Casing: ...............................Composite
Stator Housing: .............Composite
Cartridge: ..........................Composite
Impeller: ............................Composite
Shaft: ....................................Ceramic
Bearings: ............................Carbon
Thrust Bearing: ..............Ceramic
O-Ring & Gaskets: ........EPDM
Applications
The 006e3 is a high-efficiency wet rotor circulator with an ECM permanent
magnet motor. It is designed for use in open loop domestic hot water
recirculation or closed hydronic systems. A simple 3-setting speed dial
allows you to match circulator performance to system requirements.
The 006e3LC model includes a 6’ power cord.
Model Number
(Part Number)
ABCDFGShip Wt.
in. mm in. mm in. mm in. mm in. mm in. mm lbs. Kg
006e3
(VM1212-DY1-UP2A00)
5-1/2 140 4-7/8 124 2-5/8 67 3-1/4 82 5-1/8 130 5-1/8 130 3.5 1.6
006e3LC
(VM1212-DY1-UP2A01)
5-1/2 140 4-7/8 124 2-5/8 67 3-1/4 82 5-1/8 130 5-1/8 130 3.5 1.6
Mounting Positions
D
C
B
F
G
A
I
SO 228-G1
(DIN 259/BS 2779)