On Command Submittal
Submittal Data Information
101-150
ITEM NO. MODEL NO.
EFFECTIVE: July 1, 2013
JOB ENGINEER CONTRACTOR REP.
PUMP:
Casing (Volute): Stainless Steel
Stator Housing: Steel
Cartridge: 304 Stainless Steel
Impeller: Noryl
Shaft: Ceramic
Bearings: Carbon
O-Ring: EPDM
INTEGRAL FLOW CHECK (IFC
®
):
Body, Plunger: Acetal
O-Rings: EPDM
On Command Circulator
Hard Wire Push Button
(2) Copper T’s
(2) Flex Hoses
Materials of Construction:
On Command Includes:
On Command Model Numbers
Product
Number
Connection
Sizes
Motor
Ship
Wgt.
Voltage RPM HP
006-CT
1
⁄2" Male NPT
115/60/1 3250
1
⁄40 7
006-CT-USK
1
⁄2" Male NPT,
with Plumbing Kit
1
⁄40 8
008-CT
1
⁄2" Male NPT
1
⁄25 10
008-CT-USK
1
⁄2" Male NPT,
with Plumbing Kit
1
⁄25 11
0011-CF
3
⁄4" Shut-off Flange
1
⁄8 14
0011-CF-USK
3
⁄4" Shut-off Flange,
with Plumbing Kit
1
⁄8 15
A Taco resource – saving product
Application:
The Taco On Command operates 24 hours to provide hot water
“on demand” at the same time it saves water, energy and
m
oney.
T
he On Command is a small, silent pump that you attach to the
hot and cold water lines in the cabinet under the most remote
kitchen or bath fixture in the home. When the On Command
pump is activated, the cool water you normally let run down the
drain is recirculated back to the water heater through the cold
water line.
On command, the pump circulates the hot water from the water
heater and returns the cooled water back through the cold water
line. When the hot water arrives at the fixture, the On
Command’s heat sensor and control board shut off the pump to
prevent pumping excess hot water into the cold water line.
NOTE: Standard plumbing and distance requires the On
Command to be installed between the hot and cold water line at
the most distant hot water location.
CT – On Command Threaded USK – Undersink Kit
CF – On Command Flanged
Nomenclature:
On Command System - Accessories
Product
Number
Description What It Does
554-1
Remote Transmitter/
Receiver Kit
To start system with
wireless remote control
554-2
Individual Remote
Transmitter
For wireless remote control at
multiple locations
554-3
Individual Starter
Button
For hard-wired starter control
at multiple locations
554-4
Motion Sensor
Starter Kit
For automatic motion
detection start
®
Motion Sensor
RF Wireless
Starter Kit
FOR INDOOR USE ONLY.




