Product Brochure

DOMESTIC HOT WATER SYSTEMS AND PLUMBING PRODUCTS PAGE 4
Retro-t domestic hot water installation in a snap!
Using existing plumbing, the Hot-Link® Valve is installed under the most remote
kitchen or bath xture and the recirculation pump is installed back at the water
heater. The Hot-Link System recirculates “cooled” water back to the water heater
so hot lines remain hot. When hot water arrives at the xture the Hot-Link valve’s
thermal disc “snaps” shut to prevent excess hot water from entering the cold line.
Our exclusive “clean-in-place” under sink valve makes it quick and easy to keep the
system clean and operating properly. The Hot-Link circulator is provided with an
analog timer that allows the user to set the pump for operation during peak
usage hours or to run continuous.
Features and Benets:
• Clean-in-place valve design
• Creates a DHW system without a dedicated return loop piping
• Easy to retrot to existing plumbing system
• Conserves water by greatly reducing the time it takes to get hot water
• Analog pump timer allows the user to set the system to work during
peak hours or to work continuously
• Includes Hot-Link Cartridge Circulator; Hot-Link Valve
and Stainless Steel Flex Hoses and 1 full union.
Installation: Standard Piping (Refer to page 6 diagram)
Domestic Hot Water Recirculation
®
Smart, ecient domestic hot water in a snap!
The Taco Hot-LinkPlus features a smart circulator that learns household hot
water usage patterns and makes hot water available at the same times the
following week. If water usage changes the Hot-LinkPlus circulator adapts for you.
It never needs programming!
The Hot-Link System recirculates “cooled” water back to the water heater so hot
lines remain hot. When hot water arrives at the xture the Hot-Link valve’s thermal
disc “snaps” shut to prevent excess hot water from entering the cold line. Our
exclusive “clean-in-place” under sink valve makes it quick and easy to keep the
system clean and operating properly.
Features of Hot-LinkPlus™ Circulator:
• Up to 94% more energy efficient than
standard recirculation circulators.
• Fully automatic. Never needs
programming.
• LED Display.
• Vacation Function.
• 3-year warranty.
Features of Hot-Link® Valve:
• Exclusive clean in-place design.
• Saves time, water and energy.
• Easy to install.
• Ideal for home retrofits.
No recirculation line necessary.
TM
Installation: Standard Piping (Refer to page 6 diagram)