Product Brochure

006 Bronze
008
Stainless
Steel
Pump Selection Charts
This information is provided as a guide only. Find the table below that best describes the design you plan
to use. Select the circulator based on the supply and return pipe size, pipe line length, and circulator model.
Do not oversize the pump or high velocity noise and erosion corrosion of the system piping may result.
1/2" Supply and Return Lines
3/4" Supply and Return Lines
Assumptions
Flow = 1 GPM
Max. Velocity = 3 ft./sec.
Allowances have been added for pressure drop
of other typical system components
Type L Copper Tubing
Supply & Return Piping are equal in length
Model
Number
Supply Pipe
Maximum Length (ft.)
Total Maximum
Pipe Length (ft.)
006 100 250
008 250 450
006-IFC* 100 250
008-IFC* 250 450
Model
Number
Supply Pipe
Maximum Length (ft.)
Total Maximum
Pipe Length (ft.)
006 150 300
008 300 600
006-IFC* 150 300
008-IFC* 300 600
*With Optional Integral Flow Check *With Optional Integral Flow Check
Choosing the Correct SmartPlus Circulator for the Job
006
Stainless
Steel