Specification

Submittal Data Information
Job: Engineer:
Contractor:
Rep:
ITEM NO. MODEL NO.
2021
101-201
Effective: August 16, 2021 Supersedes: March 5, 2021
0015e3
®
ECM High-Efciency Circulator
Specifications
• Max. Shut-off Head: 18 feet
• Max. Flow: 16 gpm
• Max. Operating Pressure:
- Cast Iron: 125 psi (8.6 bar)
- Stainless Steel: 150 psi (10 bar)
• Max. Water Temp: 230°F (110°C)
• Min. Water Temp: 36°F (2°C)
• Electrical specifications:
Voltage: 120V, 60 Hz
Single phase
Max. Operating Power: 44W
Max. AMP Rating: 0.54
• Cast iron casing suitable for
closed loop systems only
• Stainless steel casing suitable for
potable water or open systems
• Not suitable for chilled water
• Taco circulator pumps are
for indoor use only
• Acceptable for use with water or
maximum of 50% water/glycol solution
Pump Dimensions & Weights
Materials of Construction:
Casing: ...............................Cast Iron or
................................................Stainless Steel
Stator Housing: .............Composite
Cartridge: ..........................Composite
Impeller: ............................Composite
Shaft: ....................................Ceramic
Bearings: ............................Carbon
Thrust Bearing: ..............Ceramic
O-Ring & Gaskets: ........EPDM
Applications
The 0015e3 is a variable speed, high-eciency wet rotor
circulator with an ECM permanent magnet motor. Its ECM
performance is equivalent to the Taco 0015 3-Speed circulator.
It is ideal for hydronic systems zoned with circulators or zone valves
or used on potable water systems for domestic water recirculation.
The 0015e3 is not suitable for chilled water systems.
Certified to
NSF/ANSI 61 & 372
Connection
Types
Stainless Steel
models only
Cast Iron Universal Flange
Cast Iron Standard Flange
Stainless Steel Union Stainless Steel Universal Flange
D
G
F
C
B
A
Model
Number
Connection
Type
Casing
A B C D F G Ship Wt.
in. mm in. mm in. mm in. mm in. mm in. mm lbs. Kg
0015e3-2F2 Standard CI 6 152 4-1/8 104 3-3/16 80 3-1/4 82 5 126 6-3/8 161 5.8 2.6
0015e3-2F4 Universal CI 6 152 4-1/8 104 3-3/16 80 3-1/4 82 5 126 6-3/8 161 6 3.7
0015e3-SF4 Universal SS 6 152 4-1/8 104 3-3/16 80 3-1/4 82 5 126 6-3/8 161 5.5 2.5
0015e3-SU Union SS 5-1/6 131 4-1/8 104 3-3/16 80 3-1/4 82 5 126 5-1/8 130 4.6 2.1
C
D
ISO 228-G1
(DIN 259/BS 2779)
G
F
B
A
Electrical Data
Model Volts Hz Ph
Max.
Amps
Max.
Watts
RPM
All Models 120 60 1 .54 44 1590-4830
Motor Type ECM, Permanent Magnet, Thermally Protected