User Instructions

T12CVS8
87
HBM: public
Condition at the time of delivery
Signal PDO 2 (transmit,
max. 1.2 kHz)
Off
Torque low pass 2*
Torque + torque low pass 2
Signal PDO 3 (transmit,
max. 0.6 kHz)
Off*
Power + rotor temperature
Signal PDO 4 (transmit,
max. 0.6 kHz)
Off*
Torque, speed/angle of rotation status
Write calibration information
Torque calibration date
(dd.mm.yyyy)
30.11.06
Torque calibration initials
RH
Torque calibration cycle
0
Measuring point number
0
Speed/angle of rotation
output calibration date
(dd.mm.yyyy)
30.11.06
Speed/angle of rotation
output calibration initials
KM
Speed/angle of rotation
output calibration cycle
0
Measuring point number
0
Voltage calibration date
(dd.mm.yyyy)
30.11.06
Voltage calibration
initials
HM
Voltage calibration cycle
0
Measuring point number
0
Passcode entry
Enter passcode
(1 – 9999)
0
TRANSDUCER PARAMETERIZATION
Torque
Measuring point name
MyTorqueMeasPnt