User Instructions

Specifications
T12CVS8
83
HBM: public
Nominal (rated) torque M
nom
kN·m
15
20
25
30
40
50
Weight, approx.
Rotor
kg
28
33
Stator
kg
5
5
16)
Option 9, code U
17)
Option 9, code N
18)
Each type of irregular stress (bending moment, lateral or axial force, exceeding nominal (rated)
torque) can only be permitted up to its specified limit, provided none of the others can occur at the
same time. If this condition is not met, the limit values must be reduced. If 30% of the bending limit
moment and lateral limit force occur at the same time, only 40% of the axial limit force is
permissible and the nominal (rated) torque must not be exceeded. The effects of 10% of the
permissible bending moments, axial and lateral forces on the measurement result are ±0.02% of
the nominal (rated) torque.
19)
Limit loads / Option 4, Code F (high-speed version): Limit loads (bending moment, lateral or axial
force and oscillation width (peak-to-peak)) are reduced by 20%.
20)
The nominal (rated) torque must not be exceeded.
21)
The influence of radial run-out deviations, eccentricity, defects of form, notches, marks, local
residual magnetism, structural inhomogeneity or material anomalies needs to be taken into
account and isolated from the actual undulation.