User Instructions

T12-Assistent, Version 1.2
62 HBM: public T12CVS8
► Next open the menu again and switch calibration active to "ON" (orange)
and then confirm with OK (green)
Fig. 14.3 Calibration information for TEDS, frequency output
► Then save the settings for torque to the TEDS provided for them in the
transducer under the parameter set you choose. Next select the desired
sensor type and confirm with (green)
Information is only written to TEDS when the parameter set is saved.
► TEDS data is read automatically after the T12(HP) transducer is connected
to the QuantumX module MX460B, MX840B/440B. Then TEDS can be
read