User Instructions

Load-carrying capacity
T12CVS8 HBM: public 49
13 TEDS
TEDS (Transducer Electronic Data Sheet) allows you to store the transducer
data (rated outputs) in a chip, that can be read out by a connected measuring
device.
Information
Not all available amplifiers/measuring devices support the TEDS functionality
of the T12 torque transducer.
The T12CVS8 digital torque transducer has two TEDS modules:
• TEDS 1 (torque): A choice of voltage sensor or frequency sensor/pulse
sensor
• TEDS 2 (speed/angle of rotation): Frequency sensor/pulse sensor
The data are written automatically into the TEDS modules by the
T12CVS8
Assistant, when the parameters are stored. The same menu is used to select
whether the device should be presented as a voltage sensor and as a
frequency sensor or as a frequency or pulse sensor. A template is also stored,
which provides the conversion factors for the various physical quantities.
The T12CVS8 is a transducer, that is to say, the T12CVS8 does not read the
TEDS modules, it only writes them. (We therefore strongly advise against
editing the values with the HBM TEDS Editor, for example!)
You can use the TEDS Editor to read the TEDS module data.
Important
To ensure that the data of the TEDS modules correspond to the properties of
the T12CVS8 torque transducer, you must not overwrite the information from
the amplifier.
For more information on TEDS, look in the T12 Assistant online Help.