User Instructions

Signal flow
T12CVS8 HBM: public 17
The torque signal and the rotational speed signal can be filtered via two low
passes connected in series, with the filter outputs also being available
separately.
The scaled, unfiltered torque signal is used to calculate the power. The
resultant, highly-dynamically calculated power signal is filtered via a further low
pass.
For settings over 100 Hz (torque low-pass filter 1 only), phase delay
compensation is run for the angle of rotation signal. This ensures that torque
and angle of rotation values that are measured simultaneously are also output
simultaneously.
Two pulse series offset by 90 are available as RS-422-compatible signals for
rotational speed and angle of rotation.