User Instructions

Signal flow
16 HBM: public T12CVS8
6 Signal flow
Fig. 6.1 Signal flow diagram
The torque and the temperature signal are already digitized in the rotor and
transmission is noise-free.
The torque signal can be zeroed , scaled (2-point scaling)
and filtered via two low passes (LP1 and LP2). Further scaling of the
frequency output and the analog output is then possible.
Important
Scaling at position (see Fig. 6.1) changes the internal calibration of the
torque transducer.
The rotational speed signal can be filtered and also scaled for the analog
output.
The angle of rotation signal, the power signal (low-pass filter LP) and the
temperature signal are only available on the fieldbuses.