Owner's Manual

5
15. Using a T20 Torx, install mini ANL fuse into the fuse holders.
16. Turn vehicle on and test amplifier. Make the necessary adjustment to the amplifiers settings.
17. Reassemble Radio, climate controls, driver panel and glove box.
18. Reposition carpet, snap and tuck into place in factory locations.
19. Reinstall the seats. The rear of the seat’s brackets will sit on top of the amp rack feet and bolt down, sandwiching the amp rack
between the seat and the floor. Slide the seats back and forth to make sure there is no interference between the seats and amplifiers.