Owner's Manual

3. Pull back carpet and locate the floor grommet under the seat. Remove grommet. Using a ½ inch drill bit, drill hole in grommet.
4. Using a pry tool and 10 mm socket, unhook the door catch then remove door seal and kick panel cover.
5. 1. Unclip and remove the panel below the steering column. (Figure A), Unclip the climate control panel and set aside. (Figure B),
Remove (2) Phillips screws securing the radio trim panel, then unclip and remove the panel. (Figure C), Remove (4) Phillips screws
securing the radio, then unplug and remove. (Figure D)
Figure A Figure B Figure C Figure D
P:2