Brochure

800-017210-45 Rev. 9 4/19
Electronic Sensor Faucets
4
ChekPoint Electronic Faucets
Typical Below Deck Installation
Installation is simple with ChekPoint faucets:
1 Mount Faucet (Deck- or Wall-Mount)
2 Mount Control Module to Wall Below Sink
3 Connect Supply Lines
4 Connect Sensor Cable from Faucet to Control Module
Choose Your Power Options:
5 Mount and Attach EC-HYDROGEN 1.0 GPM or higher
Hydrogenerator (-HG Models Only), OR
6 Mount and Attach EC-HYDROGEN-LF Low Flow 0.5–1.0 GPM
Hydrogenerator (Available for use on models with a ow rate between
0.5 GPM-1.0 GPM)
7 Four ‘AA’ Batteries in Control Module (D/C, Included)
8 Electric Plug-In Wall Transformer (
AC, Included)
Packaging For the ChekPoint
Electronic Faucet
All components are
clearly packaged
for ease of
assembly.
6
Other Technical Data
Consult the applicable T&S Brass ”Installation and Maintenance
Instructions for ChekPoint Faucets” booklet for a complete guide to
installing and maintaining your faucet.
Replacement Parts
A full range of replacement and repair parts are available for
ChekPoint faucets with a list in the applicable ChekPoint” Installation
and Maintenance Instructions” booklet.
Limited Three Year Warranty
T&S warrants ChekPoint faucets to be free from defects
in material and workmanship for a period of three (3)
years from the date of purchase.
EC-HYDROGEN-LF
8
2
3
5
7
T&S Brass and Bronze Works, Inc.
2 Saddleback Cove
•
P.O. Box 1088
•
Travelers Rest, SC 29690
Phone [phone]
•
Fax [phone]
•
E-mail: [e-mail]
www.tsbrass.com