Brochure

6
Electronic Sensor Faucets
ChekPoint Faucets Ganging Option
Gang-install up to eight faucets with one
power supply
The EC-HARDWIRE and EC-EASYWIRE installation options
allow you to gang-install multiple ChekPoint models
(up to eight) using only one power supply.
Options include:
•
EC-HARDWIRE – 100-240 VAC Electronic AC transformer to
hardwire up to eight (8) electronic ChekPoint faucets to a
single power supply
•
EC-EASYWIRE – 100-240 VAC Plug-in transformer allows up
to eight (8) electronic ChekPoint faucets to be ganged to a
single plug-in transformer (requires one EC-EASYWIRE4CC
connector for each additional faucet in chain)
•
EC-EASYWIRE4CC – 4’ connector cables for EASYWIRE AC
transformer connections in a daisy-chain circuit (one
EC-EASYWIRE4CC needed for each additional faucet in chain)
•
EC-EASYWIRE5EXT – 5’ extension cables when additional
cable length is needed for connections
•
EC-ADEWIRE – 33’ long cable used for EC-HARDWIRE for each
Above Deck Electronic (ADE) faucet
EC-HARDWIRE
Electronic Transformer
EC-EASYWIRE
100-240 VAC
Plug-In
Transformer
EC-EASYWIRE4CC
4’ Connector Cables for EasyWire AC
transformer connections
ChekPoint Thermostatic Mixing Valves
The EC-SMT and EC-TMV thermostatic mixing valve options
allow you to add a thermostatic mixing valve in either an
above deck or below deck installation.
Features and benets for both include:
•
Solid low-lead brass construction
•
Integral check valves built into hot and cold inlets
to prevent backow and water contamination
•
½” NPSM male ttings – easy to connect
supply lines
•
Filter screens included – prevent particles from
damaging faucet or solenoid valves
•
Tamper resistant temperature limit stop concealed
under knob prevents water from exceeding
desired maximum temperature
•
Compatible with all ChekPoint faucets and
accessories, including hydrogenerator
•
Fully complies with the following:
- ASME A112.18.1 / CSA B125.1
ANSI/NSF 61-Section 9
- California Health and Safety Code 116875 (AB1953-2006)
- NSF/ANSI 372 – Low Lead Content (0.25% Max)
- ASSE 1070
EC-TMV
EC-TMV:
•
Designed for below deck or concealed
installations
•
Locking knob with color coded index – simple
to adjust to the desired temperature
•
Can be added to any ChekPoint faucet by
specifying with a -TMV sux (i.e. EC-3100-TMV)
EC-SMT:
•
Designed for above deck installations – easy
access for user to adjust temperature
•
Accommodates sink or countertop up to 1
3
/16”
thickness with holes from 1” to 1½”– universal
design for virtually any application
•
Polished chrome-plated handle – easy to clean,
matches nish of all the ChekPoint faucets
•
Lever style – simple to rotate and operate
•
Vandal-resistant handle screw – prevents
vandals from accessing the temperature
limit stop
•
Easy to identify temperature markings
•
Fully complies with ADA (ICC/ANSI A117.1)
EC-SMT
EC-ADEWIRE
33’ Cable for EC-HARDWIRE
for each ADE faucet