Installation Guide

4
Faucet InstallaƟ on:
1. Shut off water supply and drain lines. Drill a hole approximately
1-1/2” diameter in countertop where you are installing no.1.
2. Remove no.5 and no.4 from no.1.
3. Place no.1 through hole in sink, align hot and cold sides parallel to sink
line.
sink
5
4
4. Install no.4 and no.5 on no.1,  ghten no.5.
5. Install no.6 into threaded holes of no.5. Tighten by hand.
6. Connect supply lines and check for leaks.
1
General Instructions
6