Data Sheet
REPLICATOR MODULAR FORMAT
Re-Designed. Re-Engineered. Re-Housed.
The Replicator Studio module uses much of the same technology of the ”stompbox” version, but certain
parameters and features are optimized for Eurorack/studio use.
CV inputs accept 0-5V control signals, so you can now plug in your favorite oscillator module and control
delay time and/or feedback electronically.
Pair it up with a funky, modern wave generator for a perfect marriage between 70´s ambience and con-
temporary sound manipulation.
The added lter switch dampens high frequency content in the delay signal for less noise and a darker
echo.
The power supply has been modied to run from the +/-12V Eurorack standard, so you get all the same
sounds and features from the pedal version, but in a more studio/keyboard/synth-friendly format.
Get creative with CV control of true tape echos, process instrument signals/tracks in the studio or use as a
table top echo unit for live sound.
TECHNICAL SPECS
• All analog echos and signal path
• Delay time controlled by a digitally controlled
motor
• Three echo modes, modulation of the echo
and tap tempo
• CV inputs for controlling time/feedback – get
super spacious, yet ultra cool sounds
• Kill-dry switch for parallel processing (mixer)
• Housed in a compact Eurorack module (44HP)
Input impedance @ 1KHz Higher than 450K Ohm
Output impedance @ 1KHz Lower than 2,5K Ohm
Power supply 12V DC
Current draw @ 12V DC 300 mA
Maximum input signal Vp-p 7,8Vp-p (11dBu)
External connectors Input, Feedback, Speed, Output, 24V DC jack
Controls Chorus, Volume, Saturate, Feedback, Delay Level, Time,
Heads, Chorus on/o, Filter switch, Tap tempo, Killdry
Pedal size incl knobs (W x H x D) 222 x 38 x 129 mm / 8,74 x 1,50 x 5,08 inch
Weight excl. packaging 922 g / 32,52 oz
+
+
-
-
STUDIO MODULE