U SER M A N UA L
CONGRATULATIONS on your purchase of the Alberta II, a new version of our vintage overdrive pedal that gives you two channels of classic T-Rex drive tones. Now you got the opportunity to get two Albertas in one box! The Alberta II lets you adjust the two channels independently, so you can go from your clean sound to a rhythm overdrive and then switch channels for a more overdriven or louder sound. You can also adjust the two channels to the same gain and volume levels, but with different tone settings.
ALBERTA II CONTROLS Your Alberta II has 4 controls for each channel: GAIN, LEVEL, TONE and FAT BOOST. The GAIN knob is the most important control on your Alberta II. The more you crank it up, the more gain you get. The two channels gives you the opportunity to switch between two types of great overdrive. Use the LEVEL knob to set the overall output volume from the pedal. At 12 o’clock your output is the same as your input volume. Turning it all the way up (clockwise) will boost your output signal by 15 dB.
TECHNICAL SPECIFICATIONS Input Impedance@1KHz Higher than 1M Ohm Output Impedance@1KHZ Lower than 1K Ohm Power supply 9V DC (T-Rex FuelTank) Minimum Power supply Voltage 8V DC Maximum Power supply Voltage 12,5V DC Current Draw @ 9V DC 20 mA Maximum Input signal Vp/p 3Vp/p Battery Type 9 V battery 6F22 Battery Life 5 to 8 Hour External connectors Input Jack.
ISSUED IN VEJLE, 2013 Lars Dahl-Jørgensen Founder Sebastian Jensen Founder T-Rex Engineering ApS www.t-rex-effects.
