User Manual

MOUNTING BRACKET INCLUDED:
The Goliath comes with a mounting bracket that allows you to secure the
Goliath to your pedalboard in an easy and effective way.
Using the four LONG screws:
In case you are mounting the Goliath to a T-Rex ToneTrunk (or similar) board,
place the Goliath underneath the board and the bracket on top of the board.
Use the LONG screws.
(Please be aware that placing sensitive pedals directly on top of the Goliath
can result in a hum in your signal).
Using the four SHORT screws:
In case you are mounting the Goliath to a wooden board, you can attach the
bracket directly to the Goliath and use the four small holes in the bracket to
attach the bracket to the board.
(The screws for the four small holes are not included).
Caution:
If the four LONG screws are used, DO NOT attach the bracket directly to the
Goliath! Make sure that there is some distance between the bracket and the
Goliath OR use the four SHORT screws.
The LONG screws can damage the internal components, if they are screwed
in too far. Doing so will void the warrenty.