User Manual

SELECT, PLUG, AND PLAY
Getting started
Goliath gives you 7 separate outlets for plugging your pedals into. Here’s
how they work:
• Outlets 1–5 can all be used to power either 9V or 12V DC pedals. For
each outlet, just use the VOLTAGE SELECTOR switches to choose the
voltage you need, plug in your pedal and go!
• Outlet 6 is a non-switchable 18V DC outlet for your 18V pedals.
• Outlet 7 is a 12V AC outlet for pedals that require AC power.
All the cables you need
Your new Goliath comes with a full set of cables to help you keep your
board clutter-free. Once you’ve selected your voltage options, just plug
in and play!
TECHNICAL SPECIFICATIONS
Dimensions (W x H x D)
Weight (excl. packaging)
180x92x48 mm / 7,1x3,6x1,9 inch
1,4 kg/ 49,4 oz
Power supply Switchable 115V or 230V mains
Fuse T315mA / 250V
Connections 5 x 9 or 12VDC 450mA
1 x 18VDC 250mA
1 x 12VAC 450mA
All the cables you need:
1 x Mains power cable
1 x Black Link DC cable with five 2,1mm – 2,1mm connectors
1 x Red 50cm AC cable with 2,1mm – 2,5mm connectors for use on the 12V AC outlet.
1 x Blue 50cm AC cable with 2,5mm – 2,5mm connectors for use on the 12V AC outlet.
1 x black 50cm DC cable with 2,1mm connector – 3,5mm mini-jack connector
1 x Orange 10cm Polarity inverter cable with 2,1mm connector – 2,1mm female connector.
1 x Green Current doubler cable. 2 x 2,1mm connectors – 2,1mm connector
2 x Black 20cm DC cables with 2,1mm – 2,1mm connector.
4 x Black 50cm DC cables with 2,1mm – 2,1mm connector.
2 x Black 75cm DC cables with 2,1mm – 2,1mm connector.