Congratulations on your purchase of the SHAFTER WAH, a true new-generation wahwah with an premium-quality custom coil and far more versatility than you get with a traditional wah. The SHAFTER is actually 3 pedals in 1. You get 2 great wah-wahs, plus a dual-filter yoy-yoy effect. And you can tune all 3 effects to deliver the exact sound and performance you want. Be sure to study the overview of controls in this manual. The better you know your SHAFTER, the higher you’ll find it will take you.
SHAFTER controls Like most wah-wah units, your SHAFTER is switched on and operated using the PEDAL controller. To turn the unit on or off, press the PEDAL all the way down to activate the ON/OFF button hidden beneath the PEDAL. Once you’ve switched your SHAFTER, you’ll want to select a mode via the MODE switch. The 3 modes are: WAH 1: A light wah effect that’s perfect for clean guitar sounds and rhythm parts WAH 2: A class full-out wah you’ll recognize from history’s great wahwah solos.
Input impedance@1KHz Output impedance@1KHZ Power supply Higher than 1M Ohm Lower than 1K Ohm 9V DC (T-Rex FuelTank) Minimum power supply voltage 8V DC Maximum power supply voltage 12,5V DC Current draw @ 9V DC Maximum input signal Vp/p Battery type Battery life External connectors Controls 45 mA 3Vp/p 9V battery 6F22 Max. 4 hours Input Jack, Output Jack, 9V DC jack ON/OFF switch, Hot spot switch, Boost, WAH mode, Slope Pedal size incl.
