Congratulations on your purchase of the Nitros, a premium hypergain pedal from T-Rex Effects. The Nitros is a hard-edged distortion with the ability to shape the overall sound via the 3-band equalizer. While you can certainly use it with the EQ set flat (all knobs at 12 o’clock), we encourage you to read on and experiment with the EQ controls to uncover the full range of scorching tones that this bad boy has to offer.
NITROS controls Gain: Adjusts the amount of distortion in the effect. Level: Adjusts the overall output level of the effect. Bass, Mid, Treble: Active cut/boost of the low, middle and high frequencies, respectively. The three equalizer knobs have no effect on the sound when set to 12 o´clock i.e. no boost or cut will be applied to the signal. To boost the lows, mids or highs, turn the associated knob clockwise from the 12 o´clock position.
Input Impedance@1KHz Output Impedance@1KHZ Power supply Voltage 9V DC Higher than 1M Ohm Lower than 1K Ohm Minimum 8V DC / Maximum 12,5V DC Current Draw @ 9V DC 30 mA Maximum Input signal Vp/p 3Vp/p Battery Type / Battery Life External connectors Controls 9V battery 6F22 / 5 hours Input Jack, Output Jack, 9V DC jack On/Off switch, Gain, Level, Bass, Mid, Treble Pedal size incl. knobs (W x H x D) 60 x 50 x 117 mm / 2,4 x 2 x 4,6 inch Weight excl.
